Filters
Close
banner
Banner

SeClear G 20 Pound Bag

Available in a 20 pound bag.

SeClear G Algaecide and Water Quality Enhancer™ provides effective control of surface and bottom algae (including Chara and Nitella) while inactivating phosphorus and enhancing water quality with each application. Because of eutrophication (water body aging), successful management of nuisance algae and improving water quality can be difficult. Other copper-based algaecides, such as the old standard—copper sulfate, can control some algae present but does nothing to address phosphorus and water quality. Thus, management can turn into a cycle of application, temporary improvement, rapid regrowth, with no progress toward long-term water quality improvement.

SePRO has again advanced the science of algae management with the development of SeClear G. This new granule formulation provides all of the proven algaecidal and water quality enhancement benefits of the liquid SeClear formulation with several improvements.

By reducing the amount of available phosphorous and suspended solids with each application, SeClear G formulation provides better algae control, reduced algaecide inputs, longer intervals between applications and improved water quality.

 

 

Labels & Safety Data SheetsProduct LabelMSDS

SeClear G Algaecide and Water Quality Enhancer

SeClear G Algaecide and Water Quality Enhancer™ provides effective control of surface and bottom algae (including Chara and Nitella) while inactivating phosphorus and enhancing water quality with each application. Because of eutrophication (water body aging), successful management of nuisance algae and improving water quality can be difficult. Other copper-based algaecides, such as the old standard—copper sulfate, can control some algae present but does nothing to address phosphorus and water quality. Thus, management can turn into a cycle of application, temporary improvement, rapid regrowth, with no progress toward long-term water quality improvement.

SePRO has again advanced the science of algae management with the development of SeClear G. This new granule formulation provides all of the proven algaecidal and water quality enhancement benefits of the liquid SeClear formulation with several improvements.

By reducing the amount of available phosphorous and suspended solids with each application, SeClear G formulation provides better algae control, reduced algaecide inputs, longer intervals between applications and improved water quality.

 

 

Labels & Safety Data SheetsProduct LabelMSDS

SeClear G Algaecide and Water Quality Enhancer

SeClear G can be applied to either proactively or reactively treat problem algae and its source.

First, as an algaecide, SeClear G rapidly disrupts numerous algae cell processes and shuts down growth, quickly getting control over nuisance algae.

Second, by reducing the amount of available phosphorous and suspended solids with each application, SeClear G formulation provides better algae control, reduced algaecide inputs, longer intervals between applications and improved water quality.

Controls algae along shorelines, docks, beaches, boat launches, and fishing areas. Easy to apply as granule or dissolve in application tank and surface spray.

When applying as a granule to target bottom algae, apply as evenly as possible over treatment area at a rate of 1 lb per 2000 sq. ft. or 20 lbs. per surface acre (43,560 sq. ft.).

When dissolving in a tank for spraying surface algae, dissolve at a ratio of 1:4 (1 lb. of product to 4 gallons of water). If spray tank has agitation, you may be able to mix at a lower ratio of 1:2 or 1:3. Spray to achieve uniform coverage.

Tips: Follow-up applications are necessary to control algae regrowth. Dense algae infestations may require higher application rates. Always read and follow label directions.

SeClear G 20 Pound Bag
Available in 20 pound bags
$179.99
excluding shipping